BR5100
TECHNICAL
SPECIFICATIONS
TECHNICAL
SPECIFICATIONS
|
BR5100 TECHNICAL SPECIFICATIONS |
|
|
 Air or Gas Driven |
|||||
| Volume (maximum) |
30 Imp. Gallons per Day | |||||
| Stroke Rate |
0 to 30 strokes per minute | |||||
| Pressure |
Std. | 3000 psig (std. packing) | ||||
| Max. | 6000 psig (hard packing) | |||||
| Operating Air or Gas Pressure |
Min. | 8 psig (recommended - dependent on injection pressure requirements, some applications may work on pressures as low as 4 psig) |
||||
| Max. | 35 psig | |||||
| Available Plunger Sizes |
Std. | 3/16", 1/4", 3/8", 1/2" | ||||
| Stroke Length |
Min. | 1/3" | ||||
| Max. | 1" | |||||
| Switching System |
Std. | Micro Switch | ||||
| Opt. | Pilot Valve - Rotary | |||||
|
Materials |
|||||
|
 Pressure Head Body |
Std. | Ductile Iron | |||
| Opt. | Stainless Steel (standard on 3/16" size) | |||||
| Internal Wetted Components |
Std. | Stainless Steel | ||||
| Plunger |
Std. | Case Hardened (Nitrided) Stainless Steel | ||||
| Packing - V Style |
Std. | Buna | ||||
| Opt. | Buna-Hard, Viton, Teflon, Fluorosilicone (other materials available on request) |
|||||
| Seals - O-rings |
Std. | Fluorosilicone | ||||
| Opt. | Buna, Viton, Teflon, Metal-to-Metal (other materials available on request) |
|||||
| Diaphragm |
Std. | Thick molded Buna w/Nylon reinforcement (utilizing skirted diaphragm plate providing increased diaphragm support) |
||||
| |
| |
| |
| |
| |
| |